|
Included: (1) sheet of stickers designed to fit a variety of planners
Details:
- Sheet is available in two sizes; signature or mini
- Signature sticker sheet is available binder-ready or unpunched
- Stickers on signature measure approximately 1.5" on their longest side
- Stickers on the mini sheet measure approximately 1" on their longest side
- (3) pages available; see drop down for details
- Available binder-ready (3-hole punched for our Signature Binders), unpunched (no holes) or mini (hole punched for our Mini Binders).
Please remember that colors may vary from monitor to monitor.
- All stickers purchased, unless otherwise specified, are printed on a repositionable, semi-gloss sticker paper. This sticker paper is thinner than traditional sticker papers and has a semi-gloss finish which allows for beautiful vibrancy. These stickers can be placed on many surfaces and moved many times without losing their adhesive.
*Due to their semi-gloss finish, the best type of pen to use on these stickers is a permanent marker. Some ballpoint pens will work, but gel pens and felt-tip markers will not. Our favorite pen to use is the Microperm (available here) but a standard Sharpie permanent marker (not pen) will work great.
- - - - - - - - - - - - - - -
All Krissyanne Designs sticker sheets are printed the same size to allow for uniformity in storage. Un-punched sticker sheet size is 5" W x 8" H; our Binder-Ready sheets are slightly larger to accommodate a margin for holes. Binder-Ready sheets are designed to fit within our binders available on our website. All stickers are cut on the sheet to allow for effective removal from the backing. Due to the type of sticker paper used, stickers may seem slightly more difficult to remove from the sheet than you may be used to. Do not be afraid to bend the sheet to remove the stickers.
Note: No stickers printed by Krissyanne Designs are weatherproof, but ink should not bleed if they come in contact with slight moisture. It is not recommended to leave your stickers in a hot or humid area for an extended period of time as this could affect the adhesive on the back.
|
|
|